Lys, Seacraft Light System SLS2 (kun lykthode+kabel)




For many divers, mounting a light system on a DPV has always felt natural, since they see their DPV as a useful tool and companion – even in the darkness.
Using a DPV safely requires proper visibility ahead. When the surroundings get darker, powerful headlights support the diver’s orientation and make him more visible to the team.
That is why Seacraft always supported mounting a proper lighting system on the DPV. Simple attaching a flashlight to the DPV works, however, is not a perfect solution- due to small battery constraints, trimming and weighing challenges, and difficulty in turning ON/OFF.

Light output needs to be easily adjustable in order to compensate for the dazzling effect of small floating particles or to not interupt communication.

The Seacraft Light System fulfills these requirements, as it provides powerful, yet adjustable illumination. The system was designed for seamless integration with all Seacraft DPVs with installed power converter and draws its power via the E/O power outlet directly from the DPV’s battery. The light output can be controlled with the buttons on the DPV display.

One SLS2 set includes:

2 lamps (each with on/off switch), connected via y-cable (e/o cord)
2 screws to fasten the lamps on the Seacraft transport bracket
Please note, that the DPV must be equipped with the internal power converter (installable in Seacraft DPVs with serial number 129 and higher) and the E/O power outlet to use these lamps.

LIGHTSeacraft Light System SLS2
Light output:2 x 3600 lumens
Power:2 x 30 W
Beam angle:14 °
Colour temperature:5700 K
LED type:2 x XHP70.2
Power supply:DC stabilized 12 V / 2.5 A via DPV’s power converter and external E/O power outlet
Thermal protection:Yes
ON/OFF control:Individual, with a magnetic slide switch
Brightness adjustment:Via the buttons on the DPV display
Working time:Depending on the battery capacity. As an example: Minimum 15 h at 100 % power with a fully charged Seacraft 1000 Wh battery (when the DPV engine is not running)
DIMENSIONSSeacraft Light System SLS2
Lenght:52mm (one head)
Housing diameter:34mm (one head)
Weight:132g/ -70g in the water (one head)
OTHERSeacraft Light System SLS2
Maximum depth:300m
Tested depth:350m
Displacement:-70g (one head)
Material:Lamp casing; anodized aluminum